What happens if the probe gets warm?
It needs some time to cool down. When the temperature gets warm after using for a while, the system has a temperature control for safety purposes. Please let it cool down for 10~15 minutes by freezing or turn off the probe before start using again.
What is the battery life of the transducers?
C62 / L154 : 2~2.5 hours for continuous scan (full charged).
neo Series : >= 80 minutes for typical scan
See Product Page for more information.
Is there a way to know when the probe in low on battery?
Yes, the percentage of battery shows on the upper-right corner in the scan page.
How to turn on the probe?
Simply press down and hold the power button for 1 second and refresh user's tablet in the probe list for connections.
See LED indications for more information.
Is there a tool for the diagnostic test of the probe?
Yes, please open Apache app, click the drop-down list in the upper left corner and press “Help & About” for a diagnostic test.
After powering on, the probe’s green light keeps blinking slowly. What does this mean?
If multiple reboot attempts still result in the same issue, please contact your local distributor to use the Recovery Tool for restoration or send the probe back to the manufacturer for system recovery.
What should I do if the probe shows an orange light and won’t turn on?
Please charge the device continuously for 6-8 hours and then attempt to power it on again. If it still fails to start, please contact your local distributor.
How long do I need to charge my probe for?
C62 / L154: System and charging dock approximately 2.5 hours.
neo series: Approximately 80 mins (5V, 2A).
neo series: Approximately 80 mins (5V, 2A).
Can the probe be used until the battery is completely drained? At what battery percentage will it automatically shut down?
The probe will automatically shut down when the battery is at 5% to protect battery health. It is recommended to avoid prolonged low-battery usage to maintain battery performance.
Why does my probe update fail?
1. Ensure the connection mode in the settings is not switched to SSID mode. If it is, disable this mode.
2. The probe must have a battery level of more than 20% to proceed with updates.
2. The probe must have a battery level of more than 20% to proceed with updates.